Remote Control and Monitoring via GSM Network
- Transmission of security system messages to a central monitoring station via GSM network
- by CONTACT ID protocol.
- Decoding of alarm system messages and transfer to user mobile phone by SMS messages.
- 5 users receive information about the protected object.
- 4 programmable inputs/outputs.
- Possibility to connect up to 4 temperature sensors.
- 48 programmable names of alarm system zones and 4 partitions names.
- 16 programmable user names.
- GSM jamming detection.
- Remote control by short calls or with a mobile phone keypad (through DTMF tones).
- Remote control and programming by SMS messages.
- Full simulation of a telephone land line (ring tone signal and line voltage of 48 V).
- Remote diagnostics, programming and firmware upgrade via the Internet under GPRS
- protocol.
- Diagnostics, programming and firmware upgrade via USB connection.
- Integrated quad-band GSM module.
- Wide operating temperature range: -30 ... +65ºC.
- Easy installation
GsmAlrm-340 parameters may be set via computer using the GSM Alarm Configuration Tool GAPROG. The module is accessible via an USB port or over internet through GPRS channel.
Download GAPROG.
iGsmAlarm program is designed to make easier using of GsmAlarm devices. Install programs on your smart device and try.
iGsmAlarm user manual
Download detail information
Related items
Software for GsmAlarm devices configuration (GsmAlarm-340, GsmAlarm-500, GsmAlarm-500E, GsmAlarm-600).
Part. No.: REZT_1K
Temperature sensor for temperature mesurement. Compatible with GsmAlarm-500 and GsmAlarm-220.
Part. No.: JUT_J_LC100P
Insensible for animals 15/25kg, working field 15m
Part. No.: JUT_J_LC102
Insensible for animals 15/25kg, working field 15m
Part. No.: JUT_J_LC103
Microwave, insensible for animals 15/25kg, working field 15m.
Part. No.: JUT_J_RX40QZ
Work distance - 12m
Part. No.: JUT_J_PAR460
Protected area 6x4,5m;
Part. No.: JUT_D_318-4
Fourwire optical sensor for fire protection; 12V
Part. No.: JUT_T_EA3234
Fixed temperature (57°C) and temperature change, quadwire sensor for fire protection; 12V;
Part. No.: JUT_DT_EA318
Optical quadwire combinated temperature/smoke sensor for fire protection;12V
Part. No.: JUT_D_SM_NB9
12 VDC
Part. No.: JUT_G/D_ECG9
12 VDC
Part. No.: JUT_D_318-2
2-wire optical smoke detector with LED indicator. Compatible with GsmAlarm-500.
Two-wired composite temperature / smoke sensor for fire protection. Can be used with GsmAlarm-500.
Part. No.: JUT_T_EA3232
Two-wiral temperature sensor for fire protection. Can be used with GsmAlarm-500.
Part. No.: KL_MG32LED
Compatible with GsmAlarm-600, GsmAlarm-500 and GsmAlarm-220.
Part. No.: KL_MG32LCD
Compatible with GsmAlarm-600, GsmAlarm-500 and GsmAlarm-220.
Part. No.: KL_MG10LED
Compatible with GsmAlarm-600, GsmAlarm-500 and GsmAlarm-220
Vertical / Horizontal
Part. No.: KL_K636
Compatible with GsmAlarm-600, GsmAlarm-500 and GsmAlarm-220.
Part. No.: SI_LD-A93
2 piezo elements;
Part. No.: LA_USB141HS1
USB (type A-B, 1.8 m) cable is used to connect GsmAlarm-500 with computer.
Ask us
GsmAlarm series devices characteristics comparison will help You to choose best solution.
How much will delivery cost?
Shipping costs vary depending on weight and the location to which will be delivered. For shipping costs please contact us.
read all
Delivery tracking
You can control your order delivery by tracking number which will be given when goods is sent.
read all
How can be software upgraded?
All products are programmable only by the manufacturer except GsmAlarm-500 which is programmed via USB connection using
GAPROG software
read all
How to use iGsmAlarm program?
How to do GsmAlarm-XXX remote programing and diagnostic via USB cabel or GPRS internet?
Where to find user manuals archive?
© 1998 - 2023 JSC "Elektronines technologijos". All rights reserved.
Design and manufacturing of special purpose electronic equipment, software creation for single-crystal microcontrollers.
